Containerized industrial Steam
Boiler houses Unisteam™-s line

3 days production time, 12 months warranty, worldwide delivery,
assembling and start-up procedures in any part of the world.

Containerized Industrial Steam Boiler
houses Unisteam™-s

Containerized steam boiler houses are turnkey compact stationary steam generating units.

Steam boilers are installed inside UNISTEAM™-manufactured containers or inside freight containers according to the Customer’s request.

Stationary Steam boilers of UNISTEAM™-S are intended for facilitation of hard-to- reach oil extraction and industrial cleaning of oil well equipment. Containerized Steam boilers of Unisteam™-S line also serve for performing fireproofing of railroad transportation tanks and warming up bulk cargo.

We will offer you the optimal variant of UNISTEAM equipment according to your specific needs and assist in preparation of technical specification.
CALL US:
+7-3513-54-34-54

Models Unisteam™-s Line In Stock

The listed price is basic. Please specify the exact price at our managers, tel. +7-3513-54-34-54

Slide to the left to see the whole table.

Containerized steam generator UNISTEAM™-S2

Operator’s compartment is coated with galvanized steel; is equipped with PAR2 system; fuel tank 350 l; water tank 5,0m 3 made of carbon steel; electro drive of air shutter; carriage length 5400 mm; control panel is installed in operators compartment; 2 standard doors; 1 double door; pipelines 4,2m х 6 pcs; liquid-fuel burning device; heat insulation of carriage floor and walls with foam plastic 40 mm; PAR2 hose 10 m; wall bracket for PAR2 hose; hose nozzle 1 pc; hatch for pump assembling/disassembling; unit drive from electro drive; SPTA for steam generating unit.

GET A QUOTE

Containerized steam generator UNISTEAM™-S

Operator’s compartment is coated with HDF board; is equipped with PAR2 system; fuel tank 350 l; water tank 5,0m 3 made of carbon steel; electro drive of air shutter; carriage length 5400 mm; control panel is installed in operators compartment; 2 standard doors; 1 double door; pipelines 4,2m х 6 pcs; gangway for pipelines maintenance; liquid-fuel burning device; heat insulation of carriage floor and walls with foam plastic 40 mm; PAR2 hose 10 m; wall bracket for PAR2 hose; hose nozzle 1 pc; hatch for pump assembling/disassembling; unit drive from electro drive; SPTA for steam generating unit.

GET A QUOTE

Containerized steam generator UNISTEAM™-SD (with compartment for diesel generator)

With compartment for diesel generator; hatch for diesel generator maintenance; Operator’s compartment is coated with HDF board; is equipped with PAR2 system; fuel tank 350 l; water tank 5,0m 3 made of carbon steel; electro drive of air shutter; carriage length 6100 mm; control panel is installed in operators compartment; 3 standard doors; 1 double door; pipelines 4,2m х 6 pcs; gangway for pipelines maintenance; liquid-fuel burning device; heat insulation of carriage floor and walls with foam plastic 40 mm; PAR2 hose 10 m; wall bracket for PAR2 hose; hose nozzle 1 pc; hatch for pump assembling/disassembling; unit drive from electro drive; SPTA for steam generating unit.

GET A QUOTE

Technical Characteristics

  • Containerized steam generator UNISTEAM™-S2
  • Containerized steam generator UNISTEAM™-S
  • Containerized steam generator UNISTEAM™-SD
Choose a line:

Containerized steam generator UNISTEAM™-S2 consists of a welded frame containerized module with technological equipment inside:

  • Welded frame carriage, 5420 mm length; divided into two compartments (engine and operators compartments); covered from outside with sheet steel 1.2 mm; covered inside with galvanized steel sheet 0.5 mm.; heat insulated with insulating foam plastic 40 mm; one entrance door; one door in separating wall between compartments; rare swing doors for tanks filling and equipment assembling/disassembling; one ladder; two steam out hatches; one fixed window in separating wall between compartments; one opening window in operators compartment.
  • Welded frame platform, 5400 mm length; heat insulated with insulating foam plastic 40 mm; inside the walls space for embedded elements and cable conduits is provided.
  • Equipment:
    • Boiler module:
      • Steam boiler 1600/100 with steam capacity 1600 kg/h, pressure 100 kgs/sq.cm.
      • Quick-detachable Liquid - fuel burner.
      • Feed pump with electro drive.
      • Air fan with electro drive.
      • Fuel pump with electro drive.
      • Circulating pump with electro drive.
    • Tanks:
      • Fuel tank 350 l.
      • Feed Water Tank 5 cub.m.
    • Operator Panel in operators’ compartment.
    • Electricity dashboard.
  • Kits and additional equipment:
    • SPTA.
    • Accompanying documents.
    • Piping (6x4.2 m).
    • Angle fittings (4×90°).
    • Hose PAR-II(10 m) with a nozzle.
    • Fire extinguisher.

Containerized steam generator UNISTEAM™-S consists of a welded frame containerized module with technological equipment inside:

  • Welded frame carriage, 5400 mm length; divided into two compartments (engine and operators compartments); covered from outside with sheet steel 1.2 mm; covered inside with galvanized steel sheet 0.5 mm.; heat insulated with insulating foam plastic 40 mm; one entrance door; one door to operators’ compartment; rare swing doors for tanks filling and equipment assembling/disassembling; one ladder; one steam out hatch; one fixed window in engine compartment; one fixed window in separating wall between compartments, one opening window in operators compartment.
  • Welded frame platform, 5400 mm length; heat insulated with insulating foam plastic 40 mm; inside the walls space for embedded elements and cable conduits is provided.
  • Equipment:
    • Boiler module:
      • Steam boiler 1600/100 with steam capacity 1600 kg/h, pressure 100 kgs/sq.cm.
      • Quick-detachable Liquid - fuel burner.
      • Feed pump with electro drive.
      • Air fan with electro drive.
    • Tanks:
      • Fuel tank 350 l.
      • Feed Water Tank 5 cub.m.
    • Operator Panel in operators’ compartment.
    • Electricity dashboard.
  • Kits and additional equipment:
    • SPTA.
    • Accompanying documents.
    • Piping (6x4.2 m).
    • Angle fittings (4×90°).
    • Hose PAR-II(10 m) with a nozzle.
    • Fire extinguisher.

Containerized steam generator UNISTEAM™-SD consists of a welded frame containerized module with technological equipment inside:

  • Welded frame carriage, 6100 mm length; divided into three compartments (engine, diesel generator, and operators compartments); covered from outside with sheet steel 1.2 mm; covered inside with galvanized steel sheet 0.5 mm.; heat insulated with insulating foam plastic 40 mm; one door to engine compartment; one door to operators’ compartment; one door to diesel generator compartment; rare swing doors for tanks filling and equipment assembling/disassembling; one ladder; one steam out hatch; one fixed window in engine compartment; one fixed window in separating wall between operators’ and engine compartments; one fixed window in separating wall between operators’ and diesel generator compartments; one opening window in operators’ compartment.
  • Welded frame platform, 6100 mm length; heat insulated with insulating foam plastic 40 mm; inside the walls space for embedded elements and cable conduits is provided.
  • Equipment:
    • Boiler module:
      • Steam boiler 1600/100 with steam capacity 1600 kg/h, pressure 100 kgs/sq.cm.
      • Quick-detachable Liquid - fuel burner.
      • Feed pump HIKARIMAI EFG20821 with electro drive.
      • Air fan with electro drive.
      • Fuel pump with electro drive.
    • Tanks:
      • Fuel tank 350 l.
      • Feed Water Tank 5 cub.m.
    • Operator Panel in operators’ compartment.
    • Diesel generator.
    • Electricity dashboard.
  • Kits and additional equipment:
    • SPTA.
    • Accompanying documents.
    • Piping (6x4.2 m).
    • Angle fittings (4×90°).
    • Hose PAR-II(10 m) with a nozzle.
    • Fire extinguisher.

Technical Characteristics Of Installed Pumps

spec1

1,1 PT25D1M2

  • output: 1–2,5 cub.m/h
  • pressure: 10 МPа
  • power: 3,6–9,1 kW
  • weight: 100 kg
  • manufacturer: Svessa pump plant (Ukraine)
spec2

2,3 PT25D1M2

  • output: 2 cub.m/h
  • pressure: 10 МPа
  • power: 3,6–9,1 kW
  • weight: 355 kg
  • manufacturer: Svessa pump plant (Ukraine)
spec1

Interpump T1750

  • output: 3 cub. m/h
  • pressure: 17,2 МPа
  • shaft speed: 1750 rpm
  • power: 16,17 kW
  • weight: 18,5 kg
  • manufacturer: Interpump Group S.p.A (Italy)
spec2

HIKARIMAI EFG282

  • output: 50 l/min
  • pressure: 172 bar
  • shaft speed: 1750 rpm
  • power: 16,17 kW
  • weight: 18,5 kg
  • manufacturer: Japan

Any Questions Left?