Portable Steam generators
Unisteam™-m Line 1600/100, 2000/100, 2500/160 Truck Mounted

3 days production time, 12 months warranty, worldwide delivery,
assembling and start-up procedures in any part of the world.

Portable Steam Generator
unisteam™-m Line Mounted On Truck chassis

Portable Steam Generators UNISTEAM™-M line mounted on truck chassis with steam capacity of 1600-2500 kg of steam per hour are created for effective cleaning of oil well pipelines and equipment from wax.

Steam units are installed on all-wheel- drive trucks: Ural, KamAZ, or any other chassis. At request steam units can be manufactured with other technical characteristics.

Steam temperature up to 350°С, high pressure, up to 8 hours of continuous operation, increased excess strength of a boiler, component parts from world leading brands allow environmentally friendly recovery of oil extraction volume.

The modernized arrangement of main units provides easy access for maintenance and repair operations. The optimized axle load distribution is the basis of safe transportation in off-road conditions.

We will offer you the best variant of UNISTEAM™ equipment according to your specific needs.
CALL US:
+7-3513-54-34-54

Models Unisteam™-m Line In Stock

The price excludes truck chassis price. Please specify the full price at our managers.

Slide to the left to see the whole table.

Portable steam generator UNISTEAM™-ME mounted on short-baseline chassis

Boiler is located at the rear, central or frontal part of carrige; steam unit is equipped with PAR2 system; fuel tank 350 l; water tank 4,0m3 made of carbon steel; manual drive of air shutter; carriage length 4400 mm; control panel is installed inside carriage; 1 standard door; pipelines 4,2m х 6 pcs; liquid-fuel burning device; heat insulation of carriage floor and walls with foam plastic 40 mm; unit drive from drive shaft; SPTA for steam generating unit.

GET A QUOTE

Portable steam generator UNISTEAM™-ME mounted on short-baseline chassis

Boiler is located at the rear, central or frontal part of carrige; steam unit is equipped with PAR2 system; fuel tank 350 l; water tank 5,0m3 made of carbon steel; manual drive of air shutter; carriage length 4400 mm, control panel is installed inside carriage; 1 standard door; pipelines 4,2m х 6 pcs; liquid-fuel burning device; heat insulation of carriage floor and walls with foam plastic 40 mm, unit drive from drive shaft; SPTA for steam generating unit.

GET A QUOTE

Portable steam generator UNISTEAM™-M mounted on truck chassis

Boiler is located at the rear, central or frontal part of carrige; steam unit is equipped with PAR2 system; fuel tank 350 l; water tank 5,0m3 made of carbon steel; electro drive of air shutter; carriage length 5400 mm, control panel is installed inside truck cabin; 3 standard doors; pipelines 4,2m х 6 pcs; liquid-fuel burning device; heat insulation of carriage floor and walls with foam plastic 40 mm; PAR2 hose 10 m; wall bracket for PAR2 hose; hose nozzle 1 pc; hatch for pump assembling/disassembling; unit drive from drive shaft; SPTA for steam generating unit.

GET A QUOTE

Technical Characteristics

The following drawings are shown as an example. Steam generators of UNISTEAM™-M line can be mounted on any type of truck chassis.

  • UNISTEAM™-M
    on chassis KAMAZ 43118
  • UNISTEAM™-M
    on chassis URAL 4320
  • UNISTEAM™-ME
    on chassis KAMAZ 43118
  • UNISTEAM™-ME
    on chassis URAL 5557
Choose a line:

UNISTEAM™-M consists of a chassis modified to mount a steam unit and a steam unit itself consisting of:

  • Welded frame carriage, 5420 mm length, covered from outside with sheet steel 1.2 mm; covered inside with galvanized steel sheet 0.5 mm., space between outer and inside casing is filled with heat insulating material (insulating foam plastic 40 mm); three doors, three ladders; one steam out hatch; one window.
  • Welded frame platform, 5400 mm length, heat insulated with insulating foam plastic 40 mm; Inside the walls space for embedded elements and cable conduits is provided.
  • Equipment:
    • Steam boiler 1600/100 with steam capacity 1600 kg/h, pressure 100 kgs/sq.cm.
    • Liquid - fuel burner.
    • Feed pump.
    • Air fan.
    • Fuel tank 350 l.
    • Fuel pump.
    • Feed Water Tank 5 cub.m.
    • Control panel installed in truck cabin.
  • Kits and additional equipment:
    • SPTA.
    • Accompanying documents.
    • Piping (6×4,2 м).
    • Angle fittings (4×90°).
    • Hose PAR-II(10 m) with a nozzle.
    • Fire extinguisher.
    • Wheel blocks.

UNISTEAM™-M consists of a chassis modified to mount a steam unit and a steam unit itself consisting of:

  • Welded frame carriage, 5420 mm length, covered from outside with sheet steel 1.2 mm; covered inside with galvanized steel sheet 0.5 mm., space between outer and inside casing is filled with heat insulating material (insulating foam plastic 40 mm); three doors, three ladders; one steam out hatch; one window.
  • Welded frame platform, 5400 mm length, heat insulated with insulating foam plastic 40 mm; Inside the walls space for embedded elements and cable conduits is provided.
  • Equipment:
    • Steam boiler 1600/100 with steam capacity 1600 kg/h, pressure 100 kgs/sq.cm.
    • Liquid - fuel burner.
    • Feed pump.
    • Air fan.
    • Fuel tank 350 l.
    • Fuel pump.
    • Feed Water Tank 5 cub.m.
    • Control panel installed in truck cabin.
  • Kits and additional equipment:
    • SPTA.
    • Accompanying documents.
    • Piping (6×4,2 м).
    • Angle fittings (4×90°).
    • Hose PAR-II(10 m) with a nozzle.
    • Fire extinguisher.
    • Wheel blocks.

UNISTEAM™-ME consists of a chassis modified to mount a steam unit and a steam unit itself consisting of:

  • Welded frame carriage, 4420 mm length, covered from outside with sheet steel 1.2 mm; covered inside with galvanized steel sheet 0.5 mm., space between outer and inside casing is filled with heat insulating material (insulating foam plastic 40 mm); one door, one ladder; one steam out hatch; one window.
  • Welded frame platform, 4400 mm length, heat insulated with insulating foam plastic 40 mm; Inside the walls space for embedded elements and cable conduits is provided.
  • Equipment:
    • Steam boiler 1600/100 with steam capacity 1600 kg/h, pressure 100 kgs/sq.cm.
    • Liquid- fuel burner.
    • Feed pump.
    • Air fan.
    • Fuel tank 350 l.
    • Fuel pump.
    • Feed Water Tank 5 cub.m.
    • Control panel installed in carriage.
  • Kits and additional equipment:
    • SPTA.
    • Accompanying documents.
    • Piping (6×4,2 м).
    • Angle fittings (4×90°).
    • Hose PAR-II(10 m) with a nozzle.
    • Fire extinguisher.
    • Wheel blocks.

UNISTEAM™-ME consists of a chassis modified to mount a steam unit and a steam unit itself consisting of:

  • Welded frame carriage, 4420 mm length, covered from outside with sheet steel 1.2 mm; covered inside with galvanized steel sheet 0.5 mm., space between outer and inside casing is filled with heat insulating material (insulating foam plastic 40 mm); one door, one ladder; one steam out hatch; one window.
  • Welded frame platform, 4400 mm length, heat insulated with insulating foam plastic 40 mm; Inside the walls space for embedded elements and cable conduits is provided.
  • Equipment:
    • Steam boiler 1600/100 with steam capacity 1600 kg/h, pressure 100 kgs/sq.cm.
    • Liquid- fuel burner.
    • Feed pump.
    • Air fan.
    • Fuel tank 350 l.
    • Fuel pump.
    • Feed Water Tank 5 cub.m.
    • Control panel installed in carriage.
  • Kits and additional equipment:
    • SPTA.
    • Accompanying documents.
    • Piping (6×4,2 м).
    • Angle fittings (4×90°).
    • Hose PAR-II(10 m) with a nozzle.
    • Fire extinguisher.
    • Wheel blocks.

Technical Characteristics Of Installed Pumps

spec1

1,1 PT25D1M2

  • output: 1–2,5 cub.m/h
  • pressure: 10 МPа
  • power: 3,6–9,1 kW
  • weight: 100 kg
  • manufacturer: Svessa pump plant (Ukraine)
spec2

2,3 PT25D1M2

  • output: 2 cub.m/h
  • pressure: 10 МPа
  • power: 3,6–9,1 kW
  • weight: 355 kg
  • manufacturer: Svessa pump plant (Ukraine)
spec1

Interpump T1750

  • output: 3 cub. m/h
  • pressure: 17,2 МPа
  • shaft speed: 1750 rpm
  • power: 16,17 kW
  • weight: 18,5 kg
  • manufacturer: Interpump Group S.p.A (Italy)
spec2

HIKARIMAI EFG282

  • output: 50 l/min
  • pressure: 172 bar
  • shaft speed: 1750 rpm
  • power: 16,17 kW
  • weight: 18,5 kg
  • manufacturer: Japan

Any Questions Left?