Cementing Unit
unisteam™-c Line

3 days production time, 12 months warranty, worldwide delivery,
assembling and start-up procedures in any part of the world.

Cementing Units Unisteam™-с Line

Cementing units UNISTEAM™-С line are intended for pumping of operation fluids during the cementing of oil wells in the process of drilling, well-workover, and other preflush and overflush operations at oil and gas wells.

Cementing units UNISTEAM™-С line are mounted on truck chassis and equipped with piston pump (CA-32) or plunger pump (CIN-35).

We will offer you the optimal variant of UNISTEAM™ equipment according to your specific needs and assist in preparation of technical specification.
CALL US:
+7-3513-54-34-54

Technical Characteristics

  • CА-32 (piston pump)
  • CIN-35 (plunger pump)
Choose a line:
Slide to the left to see the whole table.
Technical Characteristics Of Cementing Unit
Operating fluid Liquid fluids used for cementing and preflush and overflush operations
High pressure pump of cementing unit CA-32
Cementing piston pump
— stroke
— ratio of globoidal gear
NPC-32
250
20,5
Centrifugal pump
— pump rate, no more than, l/s
— pump outlet pressure, no more than
CNS 38–154
10,6
1,54 MPa
Manifold of cementing unit AC-32
Gauge tank capacity, m3 6
Manifold pipe nominal inside diameter, mm
— inlet
— discharge
100
50
Slide to the left to see the whole table.
Technical Characteristics Of Cementing Unit
High pressure triplex pump CIN32
Plungers diameter, mm 125
Maximum pressure, MPa, (during supply, l/s) with plungers diameter 100 mm 50 (2,3)
ДMaximum pressure, MPa, (during supply, l/s) with plungers diameter 125 mm 32 (3,7)
Maximum theoretical capacity, l/sс (m3/h) 27,0(97,2)
With plunders diameter 100 mm and maximum pressure 10.4 MPa 11,5 (41,4)
With plunders diameter 125 mm and maximum pressure 6.6 MPa 18 (64,8)
Density of pumpable fluids, kg/m3 1000-2100
Maximum pressure, MPa 1,2
Maximum rate, l/s 8,3
Tank capacity, m3 6

Any Questions Left?